Open source controller for kilns with home assisstant integration
wifi_cred.h should look something like:
#define WIFI_SSID "ssid"
#define WIFI_PASS "password"
mqtt_cred.h should look something like:
#define MQTT_BROKER "192.168.1.42"
#define MQTT_USER "qtkiln"
#define MQTT_PASS "password"
#define MQTT_PORT 1883
Using mosquitto pub and sub clients on linux, you can modify the settings and listen to the devices, e.g.:
# listen to all traffic from kilns
mosquitto_sub -v -u mqtt_user -P mqtt_password -h mqtt_host -p 1883 -t 'qtkiln/#'
# change the config for a kiln and reset it
# for example, change the mqtt update frequency to once per 3 seconds
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/config -m '{"mqttUpdateInterval_ms":3000}'
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/config -m '{"reset":true}'
# change the set point for the temperature control
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/set -m '{"targetTemp_C":42}'
# turn on the pid control
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/set -m '{"pidEnabled":1}'
//mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/get -m '{"targetTemp_C"}'
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/get -m 'statistics'
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/config -m '{"reset":true}'
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/config -m '{"mqttUpdateInterval_ms":3000}'
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/config -m '{"save":true}'
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/set -m '{"targetTemp_C":42}'
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/set -m '{"targetTemp_C":42,"pidEnabled":true}'
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/get -m '{"statistics":true}'
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/set -m '{"debugPriority":100}'
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/set -m '{"alarmOnSSR":true}'
mosquitto_pub -L mqtt://mqtt_user:mqtt_password@mqtt_host/qtkiln/ECDA3BC01AB4/set -m '{"pidEnabled":false}'
WiFi at version 3.1.3
Networking at version 3.1.3
Preferences at version 3.1.3
MAX31855_RT at version 0.6.1
SPI at version 3.1.3
EspMQTTClientFork at version 1.13.4
ArduinoOTA at version 3.1.3
Update at version 3.1.3
PubSubClient at version 2.8
WebServer at version 3.1.3
FS at version 3.1.3
ESPmDNS at version 3.1.3
TM1637 at version 1.2.0
ArduinoJson at version 7.3.1
QuickPID at version 3.1.9
sTune at version 2.4.0