3d printed radius gauge

Designed it for use in my 3d-printer enclosure to control temp/airflow but could be used for any kind of enclosure.Materials:5xm3 screws for Blades/Ri

This is an expanding gauge. It always shows equal spacing between its points. Ideal for marking buttonhole, pleats, or other repeating patterns.The nu

Learn the best manufacturing practices for making the perfect iris diaphragm blade for your metal, card, cardboard, plastic mechanical iris.

I used 6x3mm neodymium magnets, stacked 2 deep in each hole to hold the nozzle into the spindle mount.This adapter was designed to be used with an Atr

Thread Gauge Set by iamjonlawrence - Thingiverse

Friend gave me nice idea about a trash bag holder and after he left it was time to draw a 3D model of it. I tried to reduce amount of plastic and after few prints this came out... Since I'm working on my new workshop, I just draw new holders for tools, broom, airbrush, screwdrivers, bit wrench and other stuff. I also added holder for dolce gusto capsules that can be used also in workshop if capsules are changed with printed cups or modified capsules from dolce gusto coffee. My goal is to add…

Power Hacksaw by 3D Printer V4.0 by Tomlie_Xie - Thingiverse

A shorter (closer to the wall) version of the 19mm dowel hanger.

Universal Ball Mount System by Agger - Thingiverse

I modeled this on a surplus garage door opener gear set I used for a solar panel tracker system I built. http://www.youtube.com/watch?v=Xj-fqcNuqIk&am

Customized version of https://www.thingiverse.com/thing:193647Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=193647

This is the gimball i made with T-flex and i printed it on 3D working fine. No springs in that simulation. Check the actual printed model here :https://www.youtube.com/watch?v=zzf8GmdlMfk Check the CAD video here :https://www.youtube.com/watch?v=QFAw2bznCdk&t=0s Screw are plastic screw 2.5mm diameter 8mm long. You need to find springs or make your own. Springs are made of 0.6mm diameter wire, 8 turns on 4mm bar. (new upload because of issues on youtube video) edit : added 3D pdf Printing…

The Torus 122 Ring: This ring has a very simple rounded design, 3D printed layer by layer from a biodegradable PLA polymer. Thanks to the unique nature of the 3D printing process, it is printed to be semi-hollow, weighing in at less than .1 ounces.

Distance axle to axle is 44.3 mm.Big gear has a radius of 35mm, thickness of 16.031mm.Little worm gear has a radius of 23.8mm, length of 40mm.cutout f

3D PotterBot is the first truly dedicated 3D printer for the ceramic and pottery industry. This printer is capable of producing a large volumes of undiluted ceramic materials. With its large capacity constant flow RAM extruder you are able to print very precise and continuous flow prints. We have also specifically designed the envelope for larger ceramic vessels with a maximum height of 17".

I created all of these spur gears in SolidWorks for a project I am working on. For each one I created I made a 3D printed configuration for easy 3D p

This a simple worm gear mechanism. It requires a 6mm wide rod for the axle and a 608 ball bearing for the gear. The model could be easilly adapted to

I've worked with local knitters in trying to create a useful many-in-1 knitting gauge. This allows you to measure your needles in either US or mm