3d printed moving parts

READ BEFORE PRINTING! First of all, this is a non-commercial print, this means you are not allowed to sell files or prints of this model. ___________________________________________________________________________________________ This is my fourth attempt on creating a mechanical tally counter. It's adjusted so anyone with a reasonably dialed in 3D-printer will be able to print it. There are some non-printable parts but they should be easy to find at home, in any hardware store or as in my…

The story of the human race and our fascination with and ensuing exploration of outer space thus far is of course, nothing short of amazing; in fact, just the thought...

New York-based Proxy Design Studio has given Gizmodo a first glimpse of its incredible, 3D-printed spherical gear called the Mechaneu, equal parts tactile

Check out this cool mechanism! If you're into 3d printing, don't miss entering our printed gears, pulleys and cams contest ending in a few…

I made this for a friends telescope set-up to enable him to attach little mirrors and adjust their angle.Could also be used to mount a variety of comp

This started life as a 3D model on SketchUp. I used a plugin called Flattery to collapse the polygonal faces to a single plane, and then printed the parts from a screenshot. I hand-detailed the parts with a sharpie, then folded them and pasted them together. I think people who have followed my 2D artwork on this stream will noticed it isn't at all a departure from my flat artwork, in terms of visual style. Very clearly inspired by Howl's Moving Castle.

Learn how to design and 3D print interlocking joints (e.g. finger-, dovetail- and puzzle joints) to assemble your 3D printed parts.

Check out this 3D printer (translated) which [Arkadiusz Śpiewak] has been working on. When sending in the tip about his project he made the important distinction that it isn't finished, but he h...

This is a quick video showing my 3D print of Atlas from Portal 2. The model was created from scratch in Modo and then printed via Shapeways. I then assembl...

It's a 3d printed device to measure metric screws and nuts size. It's really useful for diy and hobbist.

3D printing is being part of our lives and we’re probably getting used to the idea of doing it to innovate and improve our work, and why not, our daily existence. It is always worth to look at the reality and not at the illusion, but the data and the market are quite clear. They […]

The first 3-D printed metal component in automotive mass production gets its moment in the spotlight.

There's a newer version of this design: Air Raid Siren - hand crank version 2 This is an old design! Printers and slicers had other tolerances b

A 3D printed scale model of jet engine

Machines developed by PostProcess Technologies that clean printed items are selling as fast as the startup can make them.

Files keep going corrupt so I've moved my creations to Cults3D.Springs for the V3 frame and axles, ment to be printed in PLA, ABS, PETG, Colorfabb XT

Download this STL Model for made by Amao. A hungry polar bear fails to reach the fish held in the naughty seal’s mouth. Everytime the polar bear tries to catch the fish, the seal will sink back into the water and tease the poor, hungry polar bear. In fact, polar bears are indeed always famished because of the worsening condition of the planet due to global warming, and the North Arctic has become warmer than usual. On top of this, the melting of the ice has shrunk the polar bears’ living…

small spring loaded vice, to keep parts in place when you are working on them.its printed in one piece with 0,5 mm gaps between the moving parts, you can pry them loose with a small screwdriver when its ready, this went verry easy.i printed it in pla the total size is 115x70x24mm