Some informations around my delock-11827

This contains my setup of Home Assistant - flows, automations, configs etc.

A smart piggy bank for your home assistant instance

Irrigo is an irrigation system based on ESP32, compatible with Home Assistant and MQTT

应用于智能家居中，支持全屋音响的局域网数字扬声器管理系统

This project is designed to run on the STM32F411CEUX microcontroller, handling input/output control, networking, and MQTT-based communication. The application interfaces with sensors and actuators, updates statuses in Home Assistant, and uses FreeRTOS to manage concurrent tasks.

ESP01/ESP01S Temperature sensor

AQIX ESP32-C3 SDK (Air Quality Monitor IoT Weather Station)

A module for Waybar that can show sensor values from Homeassistant

Ultralightweight battery-powered thermometer using ESP32 and MQTT with home assistant integration.

Home Assistant Deck CYD

This project relies on the implementation of the home automation system. The main idea is to create a system supporting ZigBee devices and connecting them to the main Hub. To implement this, we use the cc2531/30 USB stick as the coordinator. The endpoints are the supported devices. ESP32 is used to intercept packages sent from the coordinator an…

Display Portal based on ESP32 S3 with ETH on W5500 at ESP-IDF 5.5 2025 and 4cal display

A multifunctional light controller with 3 modes: Sun-based, Sun + Timer, and Timer only. Fully autonomous thanks to RTC backup and manual time setting. Features a web interface, button control, and Home Assistant integration. A reliable "set and forget" solution for any lighting.

Control Kakublaster from home assistant

Calido - Open Smart Thermostat and Smart Home Controller. Built on a Thingy:91 (nRF9160).

ESP01 Relay

LilyGo T-Display-S3 170x320 Running esphome using patched TFT-eSPI library

GrowNode is a vertical framework to build esp32 based devices targeted to growing plants in a controlled environment.

This driver board controls e-paper displays from Waveshare. Thus it is easy to display visually beautiful dashboards.