This is a performance-oriented, configurable Toolhead platform for the Monolith Gantry which was made for the Voron V2.4/Trident by CloakedWayne. Everything on this Toolhead is made to work smoothly inside the Monolith Gantry, which results into 0 Build Volume loss and to actually use it´s full potential.
If you have questions about the Monolith Gantry, feel free to Join the Monolith Discord.
Available Hotend configurations:
- (WC) Dragon (ACE) UHF+(+)
- Rapido UHF(+)
WIP Hotend configurations:
- Goliath Water & Air
- Chube AIR
- Secret Upcoming Hotend made by our company RCI
Available Extruder configurations:
WIP Hotend configurations:
Available Part Cooling FAN configurations:
- CPAP
- Dual 5015
WIP Hotend configurations:
- Single 5015
Available Probe configurations:
- BEACON Probe here
WIP Probe configurations:
- Klicky here
- Fully Metall Version to Support Chube and Secret Hotend Conduction, as well as some improved Water Options.
- VZHextruder Configuration since those stupid mounting positions are annoying.
- Print in place supports
- It was made to fit inside the Monolith Gantry wihtout loosing anything
- To get rid of the Toolhead limitation which results into ringing and or unwanted stuff
- Lightweight
- Since it is a lightweight Toolhead, expect extrem high IS results and faster Speed in general
- Your only downside should be the choice of extruder in long term running.
- Don´t use this Toolhead if you consider CAN Support. Some Extruders will probably allow it, but i don´t have them in mind.
- Recommended print settings: 4 walls, 42% infill (or more), 0.2mm layer height, 0.4mm nozzle
- Recommended print settings for carrier: 3 walls, 100% infill, 0.15-02mm layer height, 0.4 nozzle
- Recommended material: ABS CF/GF or better
- 2x MakerBeam XL T-Nut 15x15 (Not realy needed, but way more comfortable)
- ?x 5.5x5.5 M3 Nuts
This work is licensed under a
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.