Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Also declare that the next one will be called v2.4 ;-)

Signed-off-by: Junio C Hamano <gitster@pobox.com>

* master:
  Post 2.3 cyce (batch #10)

変更を追加しました

On Wed, Jun 29, 2016 at 07:41:36AM +0200, Johannes Sixt wrote:

> Am 29.06.2016 um 03:43 schrieb Jeff King:
> > Another is to just put the posix/ksh schemes into the helper function,
> > and let Windows people sort it out later if they want to.
>
> Let's do this.

OK, here's a replacement for the first patch in test-match-signal (the
others do not need touched at all). It punts on Windows entirely.

It does retain the existing check for "3" in t0005 (though I note in
04422c7 you skipped the next test entirely in MINGW, and a similar
argument could perhaps apply here).

I suspect that supporting Windows in test_match_sigpipe would require
at least:

  - checking for code 3 to cover cases where we raise (either because of
    check_pipe(), or because we are doing the pop-and-raise thing in our
    cleanup handlers)

  - checking for 128 when we want sigpipe, in case we get EPIPE and it
    caused a die().

  - figuring out what the heck happens when you "kill -15" a git process
    and mapping that

But those are all just guesses (and we'd probably want to hide them
behind "if test_have_prerequisite MINGW" to avoid making the tests less
robust elsewhere).

This patch should change nothing at all for Windows, so at least we are
not making things worse.

-- >8 --
Subject: [PATCH] tests: factor portable signal check out of t0005

In POSIX shells, a program which exits due to a signal
generally has an exit code of 128 plus the signal number.
However, ksh uses 256 plus the signal number.  We've
accounted for that in t0005, but not in other tests.  Let's
pull out the logic so we can use it elsewhere.

It would be nice for debugging if this additionally printed
errors to stderr, like our other test_* helpers. But we're
going to need to use it in other places besides the innards
of a test_expect block. So let's leave it as generic as
possible.

Note that we also leave the magic "3" for Windows out of the
generic helper. This is an artifact of the way we use
raise() to kill ourselves in test-sigchain.c, and will not
necessarily apply to all programs. So it's better to keep it
out of the helper, to reduce the chance of confusing it with
a real call to exit(3).

Signed-off-by: Jeff King <peff@peff.net>

On Fri, Jan 06, 2017 at 01:04:05AM -0800, Brandon Tolsch wrote:

> git --version: 2.11.0
>
> When using git rebase -i to squash a series of commits that includes
> more than 10 commits, the generated commit message you are given to
> edit counts the old messages incorrectly.  It will say the total
> number of commits is (actual % 10) (if they were 0-based) and it will
> also count the commits as (actual % 10).

Looks like a regression in v2.10. Here's the fix.

-- >8 --
Subject: rebase--interactive: count squash commits above 10 correctly

We generate the squash commit message incrementally running
a sed script once for each commit. It parses "This is
a combination of <N> commits" from the first line of the
existing message, adds one to <N>, and uses the result as
the number of our current message.

Since f2d1706 (i18n: rebase-interactive: mark comments of
squash for translation, 2016-06-17), the first line may be
localized, and sed uses a pretty liberal regex, looking for:

  /^#.*([0-9][0-9]*)/

The "[0-9][0-9]*" tries to match double digits, but it
doesn't quite work.  The first ".*" is greedy, so if you
have:

  This is a combination of 10 commits.

it will eat up "This is a combination of 1", leaving "0" to
match the first "[0-9]" digit, and then skipping the
optional match of "[0-9]*".

As a result, the count resets every 10 commits, and a
15-commit squash would end up as:

  # This is a combination of 5 commits.
  # This is the 1st commit message:
  ...
  # This is the commit message #2:
  ... and so on ..
  # This is the commit message git#10:
  ...
  # This is the commit message #1:
  ...
  # This is the commit message #2:
  ... etc, up to 5 ...

We can fix this by making the ".*" less greedy. Instead of
depending on ".*?" working portably, we can just limit the
match to non-digit characters, which accomplishes the same
thing.

Reported-by: Brandon Tolsch <btolsch@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>

We generate the squash commit message incrementally running
a sed script once for each commit. It parses "This is
a combination of <N> commits" from the first line of the
existing message, adds one to <N>, and uses the result as
the number of our current message.

Since f2d1706 (i18n: rebase-interactive: mark comments of
squash for translation, 2016-06-17), the first line may be
localized, and sed uses a pretty liberal regex, looking for:

  /^#.*([0-9][0-9]*)/

The "[0-9][0-9]*" tries to match double digits, but it
doesn't quite work.  The first ".*" is greedy, so if you
have:

  This is a combination of 10 commits.

it will eat up "This is a combination of 1", leaving "0" to
match the first "[0-9]" digit, and then skipping the
optional match of "[0-9]*".

As a result, the count resets every 10 commits, and a
15-commit squash would end up as:

  # This is a combination of 5 commits.
  # This is the 1st commit message:
  ...
  # This is the commit message #2:
  ... and so on ..
  # This is the commit message #10:
  ...
  # This is the commit message #1:
  ...
  # This is the commit message #2:
  ... etc, up to 5 ...

We can fix this by making the ".*" less greedy. Instead of
depending on ".*?" working portably, we can just limit the
match to non-digit characters, which accomplishes the same
thing.

Reported-by: Brandon Tolsch <btolsch@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

write_commit_graph initialises topo_levels using init_topo_level_slab(),
next it calls compute_topological_levels() which can cause the slab to
grow, we therefore need to clear the slab again using
clear_topo_level_slab() when we're done.

First introduced in 72a2bfc - which
is currently only in master and not on maint.

LeakSanitizer output:

==1026==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 8 byte(s) in 1 object(s) allocated from:
    #0 0x498ae9 in realloc /src/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
    #1 0xafbed8 in xrealloc /src/git/wrapper.c:126:8
    #2 0x7966d1 in topo_level_slab_at_peek /src/git/commit-graph.c:71:1
    #3 0x7965e0 in topo_level_slab_at /src/git/commit-graph.c:71:1
    #4 0x78fbf5 in compute_topological_levels /src/git/commit-graph.c:1472:12
    #5 0x78c5c3 in write_commit_graph /src/git/commit-graph.c:2456:2
    #6 0x535c5f in graph_write /src/git/builtin/commit-graph.c:299:6
    #7 0x5350ca in cmd_commit_graph /src/git/builtin/commit-graph.c:337:11
    git#8 0x4cddb1 in run_builtin /src/git/git.c:453:11
    git#9 0x4cabe2 in handle_builtin /src/git/git.c:704:3
    git#10 0x4cd084 in run_argv /src/git/git.c:771:4
    git#11 0x4ca424 in cmd_main /src/git/git.c:902:19
    git#12 0x707fb6 in main /src/git/common-main.c:52:11
    git#13 0x7fee4249383f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2083f)

Indirect leak of 524256 byte(s) in 1 object(s) allocated from:
    #0 0x498942 in calloc /src/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
    #1 0xafc088 in xcalloc /src/git/wrapper.c:140:8
    #2 0x796870 in topo_level_slab_at_peek /src/git/commit-graph.c:71:1
    #3 0x7965e0 in topo_level_slab_at /src/git/commit-graph.c:71:1
    #4 0x78fbf5 in compute_topological_levels /src/git/commit-graph.c:1472:12
    #5 0x78c5c3 in write_commit_graph /src/git/commit-graph.c:2456:2
    #6 0x535c5f in graph_write /src/git/builtin/commit-graph.c:299:6
    #7 0x5350ca in cmd_commit_graph /src/git/builtin/commit-graph.c:337:11
    git#8 0x4cddb1 in run_builtin /src/git/git.c:453:11
    git#9 0x4cabe2 in handle_builtin /src/git/git.c:704:3
    git#10 0x4cd084 in run_argv /src/git/git.c:771:4
    git#11 0x4ca424 in cmd_main /src/git/git.c:902:19
    git#12 0x707fb6 in main /src/git/common-main.c:52:11
    git#13 0x7fee4249383f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2083f)

SUMMARY: AddressSanitizer: 524264 byte(s) leaked in 2 allocation(s).

write_commit_graph initialises topo_levels using init_topo_level_slab(),
next it calls compute_topological_levels() which can cause the slab to
grow, we therefore need to clear the slab again using
clear_topo_level_slab() when we're done.

First introduced in 72a2bfc - which
is currently only in master and not on maint.

LeakSanitizer output:

==1026==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 8 byte(s) in 1 object(s) allocated from:
    #0 0x498ae9 in realloc /src/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
    #1 0xafbed8 in xrealloc /src/git/wrapper.c:126:8
    #2 0x7966d1 in topo_level_slab_at_peek /src/git/commit-graph.c:71:1
    #3 0x7965e0 in topo_level_slab_at /src/git/commit-graph.c:71:1
    #4 0x78fbf5 in compute_topological_levels /src/git/commit-graph.c:1472:12
    #5 0x78c5c3 in write_commit_graph /src/git/commit-graph.c:2456:2
    #6 0x535c5f in graph_write /src/git/builtin/commit-graph.c:299:6
    #7 0x5350ca in cmd_commit_graph /src/git/builtin/commit-graph.c:337:11
    git#8 0x4cddb1 in run_builtin /src/git/git.c:453:11
    git#9 0x4cabe2 in handle_builtin /src/git/git.c:704:3
    git#10 0x4cd084 in run_argv /src/git/git.c:771:4
    git#11 0x4ca424 in cmd_main /src/git/git.c:902:19
    git#12 0x707fb6 in main /src/git/common-main.c:52:11
    git#13 0x7fee4249383f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2083f)

Indirect leak of 524256 byte(s) in 1 object(s) allocated from:
    #0 0x498942 in calloc /src/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
    #1 0xafc088 in xcalloc /src/git/wrapper.c:140:8
    #2 0x796870 in topo_level_slab_at_peek /src/git/commit-graph.c:71:1
    #3 0x7965e0 in topo_level_slab_at /src/git/commit-graph.c:71:1
    #4 0x78fbf5 in compute_topological_levels /src/git/commit-graph.c:1472:12
    #5 0x78c5c3 in write_commit_graph /src/git/commit-graph.c:2456:2
    #6 0x535c5f in graph_write /src/git/builtin/commit-graph.c:299:6
    #7 0x5350ca in cmd_commit_graph /src/git/builtin/commit-graph.c:337:11
    git#8 0x4cddb1 in run_builtin /src/git/git.c:453:11
    git#9 0x4cabe2 in handle_builtin /src/git/git.c:704:3
    git#10 0x4cd084 in run_argv /src/git/git.c:771:4
    git#11 0x4ca424 in cmd_main /src/git/git.c:902:19
    git#12 0x707fb6 in main /src/git/common-main.c:52:11
    git#13 0x7fee4249383f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2083f)

SUMMARY: AddressSanitizer: 524264 byte(s) leaked in 2 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>

write_commit_graph initialises topo_levels using init_topo_level_slab(),
next it calls compute_topological_levels() which can cause the slab to
grow, we therefore need to clear the slab again using
clear_topo_level_slab() when we're done.

First introduced in 72a2bfc - which
is currently only in master and not on maint.

LeakSanitizer output:

==1026==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 8 byte(s) in 1 object(s) allocated from:
    #0 0x498ae9 in realloc /src/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
    #1 0xafbed8 in xrealloc /src/git/wrapper.c:126:8
    #2 0x7966d1 in topo_level_slab_at_peek /src/git/commit-graph.c:71:1
    #3 0x7965e0 in topo_level_slab_at /src/git/commit-graph.c:71:1
    #4 0x78fbf5 in compute_topological_levels /src/git/commit-graph.c:1472:12
    #5 0x78c5c3 in write_commit_graph /src/git/commit-graph.c:2456:2
    #6 0x535c5f in graph_write /src/git/builtin/commit-graph.c:299:6
    #7 0x5350ca in cmd_commit_graph /src/git/builtin/commit-graph.c:337:11
    git#8 0x4cddb1 in run_builtin /src/git/git.c:453:11
    git#9 0x4cabe2 in handle_builtin /src/git/git.c:704:3
    git#10 0x4cd084 in run_argv /src/git/git.c:771:4
    git#11 0x4ca424 in cmd_main /src/git/git.c:902:19
    git#12 0x707fb6 in main /src/git/common-main.c:52:11
    git#13 0x7fee4249383f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2083f)

Indirect leak of 524256 byte(s) in 1 object(s) allocated from:
    #0 0x498942 in calloc /src/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
    #1 0xafc088 in xcalloc /src/git/wrapper.c:140:8
    #2 0x796870 in topo_level_slab_at_peek /src/git/commit-graph.c:71:1
    #3 0x7965e0 in topo_level_slab_at /src/git/commit-graph.c:71:1
    #4 0x78fbf5 in compute_topological_levels /src/git/commit-graph.c:1472:12
    #5 0x78c5c3 in write_commit_graph /src/git/commit-graph.c:2456:2
    #6 0x535c5f in graph_write /src/git/builtin/commit-graph.c:299:6
    #7 0x5350ca in cmd_commit_graph /src/git/builtin/commit-graph.c:337:11
    git#8 0x4cddb1 in run_builtin /src/git/git.c:453:11
    git#9 0x4cabe2 in handle_builtin /src/git/git.c:704:3
    git#10 0x4cd084 in run_argv /src/git/git.c:771:4
    git#11 0x4ca424 in cmd_main /src/git/git.c:902:19
    git#12 0x707fb6 in main /src/git/common-main.c:52:11
    git#13 0x7fee4249383f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2083f)

SUMMARY: AddressSanitizer: 524264 byte(s) leaked in 2 allocation(s).

Signed-off-by: Andrzej Hunt <ajrhunt@google.com>

write_commit_graph initialises topo_levels using init_topo_level_slab(),
next it calls compute_topological_levels() which can cause the slab to
grow, we therefore need to clear the slab again using
clear_topo_level_slab() when we're done.

First introduced in 72a2bfc (commit-graph: add a slab to store
topological levels, 2021-01-16).

LeakSanitizer output:

==1026==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 8 byte(s) in 1 object(s) allocated from:
    #0 0x498ae9 in realloc /src/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
    #1 0xafbed8 in xrealloc /src/git/wrapper.c:126:8
    #2 0x7966d1 in topo_level_slab_at_peek /src/git/commit-graph.c:71:1
    #3 0x7965e0 in topo_level_slab_at /src/git/commit-graph.c:71:1
    #4 0x78fbf5 in compute_topological_levels /src/git/commit-graph.c:1472:12
    #5 0x78c5c3 in write_commit_graph /src/git/commit-graph.c:2456:2
    #6 0x535c5f in graph_write /src/git/builtin/commit-graph.c:299:6
    #7 0x5350ca in cmd_commit_graph /src/git/builtin/commit-graph.c:337:11
    #8 0x4cddb1 in run_builtin /src/git/git.c:453:11
    #9 0x4cabe2 in handle_builtin /src/git/git.c:704:3
    #10 0x4cd084 in run_argv /src/git/git.c:771:4
    #11 0x4ca424 in cmd_main /src/git/git.c:902:19
    #12 0x707fb6 in main /src/git/common-main.c:52:11
    #13 0x7fee4249383f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2083f)

Indirect leak of 524256 byte(s) in 1 object(s) allocated from:
    #0 0x498942 in calloc /src/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
    #1 0xafc088 in xcalloc /src/git/wrapper.c:140:8
    #2 0x796870 in topo_level_slab_at_peek /src/git/commit-graph.c:71:1
    #3 0x7965e0 in topo_level_slab_at /src/git/commit-graph.c:71:1
    #4 0x78fbf5 in compute_topological_levels /src/git/commit-graph.c:1472:12
    #5 0x78c5c3 in write_commit_graph /src/git/commit-graph.c:2456:2
    #6 0x535c5f in graph_write /src/git/builtin/commit-graph.c:299:6
    #7 0x5350ca in cmd_commit_graph /src/git/builtin/commit-graph.c:337:11
    #8 0x4cddb1 in run_builtin /src/git/git.c:453:11
    #9 0x4cabe2 in handle_builtin /src/git/git.c:704:3
    #10 0x4cd084 in run_argv /src/git/git.c:771:4
    #11 0x4ca424 in cmd_main /src/git/git.c:902:19
    #12 0x707fb6 in main /src/git/common-main.c:52:11
    #13 0x7fee4249383f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2083f)

SUMMARY: AddressSanitizer: 524264 byte(s) leaked in 2 allocation(s).

Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

…lize-status-rename

GVFS-2-17-1-2/gvfs-serialize-status-rename

Includes these pull requests:

	#1
	git#6
	git#10
	git#11
	git#157
	git#212
	git#260
	git#270

Signed-off-by: Derrick Stolee <dstolee@microsoft.com>

Includes these pull requests:

	#1
	git#6
	git#10
	git#11
	git#157
	git#212
	git#260
	git#270

Signed-off-by: Derrick Stolee <dstolee@microsoft.com>

mutt,msmtp,offlineimap: make email available through mutt

Memory sanitizer (msan) is detecting a use of an uninitialized variable
(`size`) in `read_attr_from_index`:

    ==2268==WARNING: MemorySanitizer: use-of-uninitialized-value
    #0 0x5651f3416504 in read_attr_from_index git/attr.c:868:11
    #1 0x5651f3415530 in read_attr git/attr.c
    #2 0x5651f3413d74 in bootstrap_attr_stack git/attr.c:968:6
    #3 0x5651f3413d74 in prepare_attr_stack git/attr.c:1004:2
    #4 0x5651f3413d74 in collect_some_attrs git/attr.c:1199:2
    #5 0x5651f3413144 in git_check_attr git/attr.c:1345:2
    git#6 0x5651f34728da in convert_attrs git/convert.c:1320:2
    #7 0x5651f3473425 in would_convert_to_git_filter_fd git/convert.c:1373:2
    git#8 0x5651f357a35e in index_fd git/object-file.c:2630:34
    git#9 0x5651f357aa15 in index_path git/object-file.c:2657:7
    git#10 0x5651f35db9d9 in add_to_index git/read-cache.c:766:7
    git#11 0x5651f35dc170 in add_file_to_index git/read-cache.c:799:9
    git#12 0x5651f321f9b2 in add_files git/builtin/add.c:346:7
    git#13 0x5651f321f9b2 in cmd_add git/builtin/add.c:565:18
    git#14 0x5651f321d327 in run_builtin git/git.c:474:11
    git#15 0x5651f321bc9e in handle_builtin git/git.c:729:3
    git#16 0x5651f321a792 in run_argv git/git.c:793:4
    git#17 0x5651f321a792 in cmd_main git/git.c:928:19
    git#18 0x5651f33dde1f in main git/common-main.c:62:11

The issue exists because `size` is an output parameter from
`read_blob_data_from_index`, but it's only modified if
`read_blob_data_from_index` returns non-NULL. The read of `size` when
calling `read_attr_from_buf` unconditionally may read from an
uninitialized value. `read_attr_from_buf` checks that `buf` is non-NULL
before reading from `size`, but by then it's already too late: the
uninitialized read will have happened already. Furthermore, there's no
guarantee that the compiler won't reorder things so that it checks
`size` before checking `!buf`.

Make the call to `read_attr_from_buf` conditional on `buf` being
non-NULL, ensuring that `size` is not read if it's never set.

Signed-off-by: Kyle Lippincott <spectral@google.com>

Memory sanitizer (msan) is detecting a use of an uninitialized variable
(`size`) in `read_attr_from_index`:

    ==2268==WARNING: MemorySanitizer: use-of-uninitialized-value
    #0 0x5651f3416504 in read_attr_from_index git/attr.c:868:11
    #1 0x5651f3415530 in read_attr git/attr.c
    #2 0x5651f3413d74 in bootstrap_attr_stack git/attr.c:968:6
    #3 0x5651f3413d74 in prepare_attr_stack git/attr.c:1004:2
    #4 0x5651f3413d74 in collect_some_attrs git/attr.c:1199:2
    #5 0x5651f3413144 in git_check_attr git/attr.c:1345:2
    #6 0x5651f34728da in convert_attrs git/convert.c:1320:2
    #7 0x5651f3473425 in would_convert_to_git_filter_fd git/convert.c:1373:2
    #8 0x5651f357a35e in index_fd git/object-file.c:2630:34
    #9 0x5651f357aa15 in index_path git/object-file.c:2657:7
    #10 0x5651f35db9d9 in add_to_index git/read-cache.c:766:7
    #11 0x5651f35dc170 in add_file_to_index git/read-cache.c:799:9
    #12 0x5651f321f9b2 in add_files git/builtin/add.c:346:7
    #13 0x5651f321f9b2 in cmd_add git/builtin/add.c:565:18
    #14 0x5651f321d327 in run_builtin git/git.c:474:11
    #15 0x5651f321bc9e in handle_builtin git/git.c:729:3
    #16 0x5651f321a792 in run_argv git/git.c:793:4
    #17 0x5651f321a792 in cmd_main git/git.c:928:19
    #18 0x5651f33dde1f in main git/common-main.c:62:11

The issue exists because `size` is an output parameter from
`read_blob_data_from_index`, but it's only modified if
`read_blob_data_from_index` returns non-NULL. The read of `size` when
calling `read_attr_from_buf` unconditionally may read from an
uninitialized value. `read_attr_from_buf` checks that `buf` is non-NULL
before reading from `size`, but by then it's already too late: the
uninitialized read will have happened already. Furthermore, there's no
guarantee that the compiler won't reorder things so that it checks
`size` before checking `!buf`.

Make the call to `read_attr_from_buf` conditional on `buf` being
non-NULL, ensuring that `size` is not read if it's never set.

Signed-off-by: Kyle Lippincott <spectral@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

It was recently reported that concurrent reads and writes may cause the
reftable backend to segfault. The root cause of this is that we do not
properly keep track of reftable readers across reloads.

Suppose that you have a reftable iterator and then decide to reload the
stack while iterating through the iterator. When the stack has been
rewritten since we have created the iterator, then we would end up
discarding a subset of readers that may still be in use by the iterator.
The consequence is that we now try to reference deallocated memory,
which of course segfaults.

One way to trigger this is in t5616, where some background maintenance
jobs have been leaking from one test into another. This leads to stack
traces like the following one:

  + git -c protocol.version=0 -C pc1 fetch --filter=blob:limit=29999 --refetch origin
  AddressSanitizer:DEADLYSIGNAL
  =================================================================
  ==657994==ERROR: AddressSanitizer: SEGV on unknown address 0x7fa0f0ec6089 (pc 0x55f23e52ddf9 bp
0x7ffe7bfa1700 sp 0x7ffe7bfa1700 T0)
  ==657994==The signal is caused by a READ memory access.
      #0 0x55f23e52ddf9 in get_var_int reftable/record.c:29
      #1 0x55f23e53295e in reftable_decode_keylen reftable/record.c:170
      #2 0x55f23e532cc0 in reftable_decode_key reftable/record.c:194
      #3 0x55f23e54e72e in block_iter_next reftable/block.c:398
      #4 0x55f23e5573dc in table_iter_next_in_block reftable/reader.c:240
      #5 0x55f23e5573dc in table_iter_next reftable/reader.c:355
      #6 0x55f23e5573dc in table_iter_next reftable/reader.c:339
      #7 0x55f23e551283 in merged_iter_advance_subiter reftable/merged.c:69
      #8 0x55f23e55169e in merged_iter_next_entry reftable/merged.c:123
      #9 0x55f23e55169e in merged_iter_next_void reftable/merged.c:172
      #10 0x55f23e537625 in reftable_iterator_next_ref reftable/generic.c:175
      #11 0x55f23e2cf9c6 in reftable_ref_iterator_advance refs/reftable-backend.c:464
      #12 0x55f23e2d996e in ref_iterator_advance refs/iterator.c:13
      #13 0x55f23e2d996e in do_for_each_ref_iterator refs/iterator.c:452
      #14 0x55f23dca6767 in get_ref_map builtin/fetch.c:623
      #15 0x55f23dca6767 in do_fetch builtin/fetch.c:1659
      #16 0x55f23dca6767 in fetch_one builtin/fetch.c:2133
      #17 0x55f23dca6767 in cmd_fetch builtin/fetch.c:2432
      #18 0x55f23dba7764 in run_builtin git.c:484
      #19 0x55f23dba7764 in handle_builtin git.c:741
      #20 0x55f23dbab61e in run_argv git.c:805
      #21 0x55f23dbab61e in cmd_main git.c:1000
      #22 0x55f23dba4781 in main common-main.c:64
      #23 0x7fa0f063fc89 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
      #24 0x7fa0f063fd44 in __libc_start_main_impl ../csu/libc-start.c:360
      #25 0x55f23dba6ad0 in _start (git+0xadfad0) (BuildId: 803b2b7f59beb03d7849fb8294a8e2145dd4aa27)

While it is somewhat awkward that the maintenance processes survive
tests in the first place, it is totally expected that reftables should
work alright with concurrent writers. Seemingly they don't.

The only underlying resource that we need to care about in this context
is the reftable reader, which is responsible for reading a single table
from disk. These readers get discarded immediately (unless reused) when
calling `reftable_stack_reload()`, which is wrong. We can only close
them once we know that there are no iterators using them anymore.

Prepare for a fix by converting the reftable readers to be refcounted.

Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

It was recently reported that concurrent reads and writes may cause the
reftable backend to segfault. The root cause of this is that we do not
properly keep track of reftable readers across reloads.

Suppose that you have a reftable iterator and then decide to reload the
stack while iterating through the iterator. When the stack has been
rewritten since we have created the iterator, then we would end up
discarding a subset of readers that may still be in use by the iterator.
The consequence is that we now try to reference deallocated memory,
which of course segfaults.

One way to trigger this is in t5616, where some background maintenance
jobs have been leaking from one test into another. This leads to stack
traces like the following one:

  + git -c protocol.version=0 -C pc1 fetch --filter=blob:limit=29999 --refetch origin
  AddressSanitizer:DEADLYSIGNAL
  =================================================================
  ==657994==ERROR: AddressSanitizer: SEGV on unknown address 0x7fa0f0ec6089 (pc 0x55f23e52ddf9 bp
0x7ffe7bfa1700 sp 0x7ffe7bfa1700 T0)
  ==657994==The signal is caused by a READ memory access.
      #0 0x55f23e52ddf9 in get_var_int reftable/record.c:29
      #1 0x55f23e53295e in reftable_decode_keylen reftable/record.c:170
      #2 0x55f23e532cc0 in reftable_decode_key reftable/record.c:194
      #3 0x55f23e54e72e in block_iter_next reftable/block.c:398
      #4 0x55f23e5573dc in table_iter_next_in_block reftable/reader.c:240
      #5 0x55f23e5573dc in table_iter_next reftable/reader.c:355
      #6 0x55f23e5573dc in table_iter_next reftable/reader.c:339
      #7 0x55f23e551283 in merged_iter_advance_subiter reftable/merged.c:69
      #8 0x55f23e55169e in merged_iter_next_entry reftable/merged.c:123
      #9 0x55f23e55169e in merged_iter_next_void reftable/merged.c:172
      #10 0x55f23e537625 in reftable_iterator_next_ref reftable/generic.c:175
      #11 0x55f23e2cf9c6 in reftable_ref_iterator_advance refs/reftable-backend.c:464
      #12 0x55f23e2d996e in ref_iterator_advance refs/iterator.c:13
      #13 0x55f23e2d996e in do_for_each_ref_iterator refs/iterator.c:452
      #14 0x55f23dca6767 in get_ref_map builtin/fetch.c:623
      #15 0x55f23dca6767 in do_fetch builtin/fetch.c:1659
      #16 0x55f23dca6767 in fetch_one builtin/fetch.c:2133
      #17 0x55f23dca6767 in cmd_fetch builtin/fetch.c:2432
      #18 0x55f23dba7764 in run_builtin git.c:484
      #19 0x55f23dba7764 in handle_builtin git.c:741
      #20 0x55f23dbab61e in run_argv git.c:805
      #21 0x55f23dbab61e in cmd_main git.c:1000
      #22 0x55f23dba4781 in main common-main.c:64
      #23 0x7fa0f063fc89 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
      #24 0x7fa0f063fd44 in __libc_start_main_impl ../csu/libc-start.c:360
      #25 0x55f23dba6ad0 in _start (git+0xadfad0) (BuildId: 803b2b7f59beb03d7849fb8294a8e2145dd4aa27)

While it is somewhat awkward that the maintenance processes survive
tests in the first place, it is totally expected that reftables should
work alright with concurrent writers. Seemingly they don't.

The only underlying resource that we need to care about in this context
is the reftable reader, which is responsible for reading a single table
from disk. These readers get discarded immediately (unless reused) when
calling `reftable_stack_reload()`, which is wrong. We can only close
them once we know that there are no iterators using them anymore.

Prepare for a fix by converting the reftable readers to be refcounted.

Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

It was recently reported that concurrent reads and writes may cause the
reftable backend to segfault. The root cause of this is that we do not
properly keep track of reftable readers across reloads.

Suppose that you have a reftable iterator and then decide to reload the
stack while iterating through the iterator. When the stack has been
rewritten since we have created the iterator, then we would end up
discarding a subset of readers that may still be in use by the iterator.
The consequence is that we now try to reference deallocated memory,
which of course segfaults.

One way to trigger this is in t5616, where some background maintenance
jobs have been leaking from one test into another. This leads to stack
traces like the following one:

  + git -c protocol.version=0 -C pc1 fetch --filter=blob:limit=29999 --refetch origin
  AddressSanitizer:DEADLYSIGNAL
  =================================================================
  ==657994==ERROR: AddressSanitizer: SEGV on unknown address 0x7fa0f0ec6089 (pc 0x55f23e52ddf9 bp
0x7ffe7bfa1700 sp 0x7ffe7bfa1700 T0)
  ==657994==The signal is caused by a READ memory access.
      #0 0x55f23e52ddf9 in get_var_int reftable/record.c:29
      #1 0x55f23e53295e in reftable_decode_keylen reftable/record.c:170
      #2 0x55f23e532cc0 in reftable_decode_key reftable/record.c:194
      #3 0x55f23e54e72e in block_iter_next reftable/block.c:398
      #4 0x55f23e5573dc in table_iter_next_in_block reftable/reader.c:240
      #5 0x55f23e5573dc in table_iter_next reftable/reader.c:355
      #6 0x55f23e5573dc in table_iter_next reftable/reader.c:339
      #7 0x55f23e551283 in merged_iter_advance_subiter reftable/merged.c:69
      #8 0x55f23e55169e in merged_iter_next_entry reftable/merged.c:123
      #9 0x55f23e55169e in merged_iter_next_void reftable/merged.c:172
      #10 0x55f23e537625 in reftable_iterator_next_ref reftable/generic.c:175
      #11 0x55f23e2cf9c6 in reftable_ref_iterator_advance refs/reftable-backend.c:464
      #12 0x55f23e2d996e in ref_iterator_advance refs/iterator.c:13
      #13 0x55f23e2d996e in do_for_each_ref_iterator refs/iterator.c:452
      #14 0x55f23dca6767 in get_ref_map builtin/fetch.c:623
      #15 0x55f23dca6767 in do_fetch builtin/fetch.c:1659
      #16 0x55f23dca6767 in fetch_one builtin/fetch.c:2133
      #17 0x55f23dca6767 in cmd_fetch builtin/fetch.c:2432
      #18 0x55f23dba7764 in run_builtin git.c:484
      #19 0x55f23dba7764 in handle_builtin git.c:741
      #20 0x55f23dbab61e in run_argv git.c:805
      #21 0x55f23dbab61e in cmd_main git.c:1000
      #22 0x55f23dba4781 in main common-main.c:64
      #23 0x7fa0f063fc89 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
      #24 0x7fa0f063fd44 in __libc_start_main_impl ../csu/libc-start.c:360
      #25 0x55f23dba6ad0 in _start (git+0xadfad0) (BuildId: 803b2b7f59beb03d7849fb8294a8e2145dd4aa27)

While it is somewhat awkward that the maintenance processes survive
tests in the first place, it is totally expected that reftables should
work alright with concurrent writers. Seemingly they don't.

The only underlying resource that we need to care about in this context
is the reftable reader, which is responsible for reading a single table
from disk. These readers get discarded immediately (unless reused) when
calling `reftable_stack_reload()`, which is wrong. We can only close
them once we know that there are no iterators using them anymore.

Prepare for a fix by converting the reftable readers to be refcounted.

Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

The incremental MIDX bitmap work was done prior to 9d4855e
(midx-write: fix leaking buffer, 2024-09-30), and causes test failures
in t5334 in a post-9d4855eef3 world.

The leak looks like:

    Direct leak of 264 byte(s) in 1 object(s) allocated from:
        #0 0x7f6bcd87eaca in calloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:90
        #1 0x55ad1428e8a4 in xcalloc wrapper.c:151
        #2 0x55ad14199e16 in prepare_midx_bitmap_git pack-bitmap.c:742
        #3 0x55ad14199447 in open_midx_bitmap_1 pack-bitmap.c:507
        #4 0x55ad14199cca in open_midx_bitmap pack-bitmap.c:704
        #5 0x55ad14199d44 in open_bitmap pack-bitmap.c:717
        #6 0x55ad14199dc2 in prepare_bitmap_git pack-bitmap.c:733
        #7 0x55ad1419e496 in test_bitmap_walk pack-bitmap.c:2698
        #8 0x55ad14047b0b in cmd_rev_list builtin/rev-list.c:629
        #9 0x55ad13f71cd6 in run_builtin git.c:487
        #10 0x55ad13f72132 in handle_builtin git.c:756
        #11 0x55ad13f72380 in run_argv git.c:826
        #12 0x55ad13f728f4 in cmd_main git.c:961
        #13 0x55ad1407d3ae in main common-main.c:64
        #14 0x7f6bcd5f0c89 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
        #15 0x7f6bcd5f0d44 in __libc_start_main_impl ../csu/libc-start.c:360
        #16 0x55ad13f6ff90 in _start (git+0x1ef90) (BuildId: 3e63cdd415f1d185b21da3035cb48332510dddce)

, and is a result of us not freeing the resources corresponding to the
bitmap's base layer, if one was present.

Rectify that leak by calling the newly-introduced free_bitmap_index()
function on the base layer to ensure that its resources are also freed.

Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

This one is a little bit more curious. In t6112, we have a test that
exercises the `git rev-list --filter` option with invalid filters. We
execute git-rev-list(1) via `test_must_fail`, which means that we check
for leaks even though Git exits with an error code. This causes the
following leak:

    Direct leak of 27 byte(s) in 1 object(s) allocated from:
        #0 0x5555555e6946 in realloc.part.0 lsan_interceptors.cpp.o
        #1 0x5555558fb4b6 in xrealloc wrapper.c:137:8
        #2 0x5555558b6e06 in strbuf_grow strbuf.c:112:2
        #3 0x5555558b7550 in strbuf_add strbuf.c:311:2
        #4 0x5555557c1a88 in strbuf_addstr strbuf.h:310:2
        #5 0x5555557c1d4c in parse_list_objects_filter list-objects-filter-options.c:261:3
        #6 0x555555885ead in handle_revision_pseudo_opt revision.c:2899:3
        #7 0x555555884e20 in setup_revisions revision.c:3014:11
        #8 0x5555556c4b42 in cmd_rev_list builtin/rev-list.c:588:9
        #9 0x5555555ec5e3 in run_builtin git.c:483:11
        #10 0x5555555eb1e4 in handle_builtin git.c:749:13
        #11 0x5555555ec001 in run_argv git.c:819:4
        #12 0x5555555eaf94 in cmd_main git.c:954:19
        #13 0x5555556fd569 in main common-main.c:64:11
        #14 0x7ffff7ca714d in __libc_start_call_main (.../lib/libc.so.6+0x2a14d)
        #15 0x7ffff7ca7208 in __libc_start_main@GLIBC_2.2.5 (.../libc.so.6+0x2a208)
        #16 0x5555555ad064 in _start (git+0x59064)

This leak is valid, as we call `die()` and do not clean up the memory at
all. But what's curious is that this is the only leak reported, because
we don't clean up any other allocated memory, either, and I have no idea
why the leak sanitizer treats this buffer specially.

In any case, we can work around the leak by shuffling things around a
bit. Instead of calling `gently_parse_list_objects_filter()` and dying
after we have modified the filter spec, we simply do so beforehand. Like
this we don't allocate the buffer in the error case, which makes the
reported leak go away.

It's not pretty, but it manages to make t6112 leak free.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

In 1b9e9be (csum-file.c: use unsafe SHA-1 implementation when
available, 2024-09-26) we have converted our `struct hashfile` to use
the unsafe SHA1 backend, which results in a significant speedup. One
needs to be careful with how to use that structure now though because
callers need to consistently use either the safe or unsafe variants of
SHA1, as otherwise one can easily trigger corruption.

As it turns out, we have one inconsistent usage in our tree because we
directly initialize `struct hashfile_checkpoint::ctx` with the safe
variant of SHA1, but end up writing to that context with the unsafe
ones. This went unnoticed so far because our CI systems do not exercise
different hash functions for these two backends, and consequently safe
and unsafe variants are equivalent. But when using SHA1DC as safe and
OpenSSL as unsafe backend this leads to a crash an t1050:

    ++ git -c core.compression=0 add large1
    AddressSanitizer:DEADLYSIGNAL
    =================================================================
    ==1367==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000040 (pc 0x7ffff7a01a99 bp 0x507000000db0 sp 0x7fffffff5690 T0)
    ==1367==The signal is caused by a READ memory access.
    ==1367==Hint: address points to the zero page.
        #0 0x7ffff7a01a99 in EVP_MD_CTX_copy_ex (/nix/store/h1ydpxkw9qhjdxjpic1pdc2nirggyy6f-openssl-3.3.2/lib/libcrypto.so.3+0x201a99) (BuildId: 41746a580d39075fc85e8c8065b6c07fb34e97d4)
        #1 0x555555ddde56 in openssl_SHA1_Clone ../sha1/openssl.h:40:2
        #2 0x555555dce2fc in git_hash_sha1_clone_unsafe ../object-file.c:123:2
        #3 0x555555c2d5f8 in hashfile_checkpoint ../csum-file.c:211:2
        #4 0x555555b9905d in deflate_blob_to_pack ../bulk-checkin.c:286:4
        #5 0x555555b98ae9 in index_blob_bulk_checkin ../bulk-checkin.c:362:15
        #6 0x555555ddab62 in index_blob_stream ../object-file.c:2756:9
        #7 0x555555dda420 in index_fd ../object-file.c:2778:9
        #8 0x555555ddad76 in index_path ../object-file.c:2796:7
        #9 0x555555e947f3 in add_to_index ../read-cache.c:771:7
        #10 0x555555e954a4 in add_file_to_index ../read-cache.c:804:9
        #11 0x5555558b5c39 in add_files ../builtin/add.c:355:7
        #12 0x5555558b412e in cmd_add ../builtin/add.c:578:18
        #13 0x555555b1f493 in run_builtin ../git.c:480:11
        #14 0x555555b1bfef in handle_builtin ../git.c:740:9
        #15 0x555555b1e6f4 in run_argv ../git.c:807:4
        #16 0x555555b1b87a in cmd_main ../git.c:947:19
        #17 0x5555561649e6 in main ../common-main.c:64:11
        #18 0x7ffff742a1fb in __libc_start_call_main (/nix/store/65h17wjrrlsj2rj540igylrx7fqcd6vq-glibc-2.40-36/lib/libc.so.6+0x2a1fb) (BuildId: bf320110569c8ec2425e9a0c5e4eb7e97f1fb6e4)
        #19 0x7ffff742a2b8 in __libc_start_main@GLIBC_2.2.5 (/nix/store/65h17wjrrlsj2rj540igylrx7fqcd6vq-glibc-2.40-36/lib/libc.so.6+0x2a2b8) (BuildId: bf320110569c8ec2425e9a0c5e4eb7e97f1fb6e4)
        #20 0x555555772c84 in _start (git+0x21ec84)

    ==1367==Register values:
    rax = 0x0000511000001080  rbx = 0x0000000000000000  rcx = 0x000000000000000c  rdx = 0x0000000000000000
    rdi = 0x0000000000000000  rsi = 0x0000507000000db0  rbp = 0x0000507000000db0  rsp = 0x00007fffffff5690
     r8 = 0x0000000000000000   r9 = 0x0000000000000000  r10 = 0x0000000000000000  r11 = 0x00007ffff7a01a30
    r12 = 0x0000000000000000  r13 = 0x00007fffffff6b38  r14 = 0x00007ffff7ffd000  r15 = 0x00005555563b9910
    AddressSanitizer can not provide additional info.
    SUMMARY: AddressSanitizer: SEGV (/nix/store/h1ydpxkw9qhjdxjpic1pdc2nirggyy6f-openssl-3.3.2/lib/libcrypto.so.3+0x201a99) (BuildId: 41746a580d39075fc85e8c8065b6c07fb34e97d4) in EVP_MD_CTX_copy_ex
    ==1367==ABORTING
    ./test-lib.sh: line 1023:  1367 Aborted                 git $config add large1
    error: last command exited with $?=134
    not ok 4 - add with -c core.compression=0

Fix the issue by using the unsafe variant instead.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

Same as with the preceding commit, git-fast-import(1) is using the safe
variant to initialize a hashfile checkpoint. This leads to a segfault
when passing the checkpoint into the hashfile subsystem because it would
use the unsafe variants instead:

    ++ git --git-dir=R/.git fast-import --big-file-threshold=1
    AddressSanitizer:DEADLYSIGNAL
    =================================================================
    ==577126==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000040 (pc 0x7ffff7a01a99 bp 0x5070000009c0 sp 0x7fffffff5b30 T0)
    ==577126==The signal is caused by a READ memory access.
    ==577126==Hint: address points to the zero page.
        #0 0x7ffff7a01a99 in EVP_MD_CTX_copy_ex (/nix/store/h1ydpxkw9qhjdxjpic1pdc2nirggyy6f-openssl-3.3.2/lib/libcrypto.so.3+0x201a99) (BuildId: 41746a580d39075fc85e8c8065b6c07fb34e97d4)
        #1 0x555555ddde56 in openssl_SHA1_Clone ../sha1/openssl.h:40:2
        #2 0x555555dce2fc in git_hash_sha1_clone_unsafe ../object-file.c:123:2
        #3 0x555555c2d5f8 in hashfile_checkpoint ../csum-file.c:211:2
        #4 0x5555559647d1 in stream_blob ../builtin/fast-import.c:1110:2
        #5 0x55555596247b in parse_and_store_blob ../builtin/fast-import.c:2031:3
        #6 0x555555967f91 in file_change_m ../builtin/fast-import.c:2408:5
        #7 0x55555595d8a2 in parse_new_commit ../builtin/fast-import.c:2768:4
        #8 0x55555595bb7a in cmd_fast_import ../builtin/fast-import.c:3614:4
        #9 0x555555b1f493 in run_builtin ../git.c:480:11
        #10 0x555555b1bfef in handle_builtin ../git.c:740:9
        #11 0x555555b1e6f4 in run_argv ../git.c:807:4
        #12 0x555555b1b87a in cmd_main ../git.c:947:19
        #13 0x5555561649e6 in main ../common-main.c:64:11
        #14 0x7ffff742a1fb in __libc_start_call_main (/nix/store/65h17wjrrlsj2rj540igylrx7fqcd6vq-glibc-2.40-36/lib/libc.so.6+0x2a1fb) (BuildId: bf320110569c8ec2425e9a0c5e4eb7e97f1fb6e4)
        #15 0x7ffff742a2b8 in __libc_start_main@GLIBC_2.2.5 (/nix/store/65h17wjrrlsj2rj540igylrx7fqcd6vq-glibc-2.40-36/lib/libc.so.6+0x2a2b8) (BuildId: bf320110569c8ec2425e9a0c5e4eb7e97f1fb6e4)
        #16 0x555555772c84 in _start (git+0x21ec84)

    ==577126==Register values:
    rax = 0x0000511000000cc0  rbx = 0x0000000000000000  rcx = 0x000000000000000c  rdx = 0x0000000000000000
    rdi = 0x0000000000000000  rsi = 0x00005070000009c0  rbp = 0x00005070000009c0  rsp = 0x00007fffffff5b30
     r8 = 0x0000000000000000   r9 = 0x0000000000000000  r10 = 0x0000000000000000  r11 = 0x00007ffff7a01a30
    r12 = 0x0000000000000000  r13 = 0x00007fffffff6b60  r14 = 0x00007ffff7ffd000  r15 = 0x00005555563b9910
    AddressSanitizer can not provide additional info.
    SUMMARY: AddressSanitizer: SEGV (/nix/store/h1ydpxkw9qhjdxjpic1pdc2nirggyy6f-openssl-3.3.2/lib/libcrypto.so.3+0x201a99) (BuildId: 41746a580d39075fc85e8c8065b6c07fb34e97d4) in EVP_MD_CTX_copy_ex
    ==577126==ABORTING
    ./test-lib.sh: line 1039: 577126 Aborted                 git --git-dir=R/.git fast-import --big-file-threshold=1 < input
    error: last command exited with $?=134
    not ok 167 - R: blob bigger than threshold

The segfault is only exposed in case the unsafe and safe backends are
different from one another.

Fix the issue by initializing the context with the unsafe SHA1 variant.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

This one is a little bit more curious. In t6112, we have a test that
exercises the `git rev-list --filter` option with invalid filters. We
execute git-rev-list(1) via `test_must_fail`, which means that we check
for leaks even though Git exits with an error code. This causes the
following leak:

    Direct leak of 27 byte(s) in 1 object(s) allocated from:
        #0 0x5555555e6946 in realloc.part.0 lsan_interceptors.cpp.o
        #1 0x5555558fb4b6 in xrealloc wrapper.c:137:8
        #2 0x5555558b6e06 in strbuf_grow strbuf.c:112:2
        #3 0x5555558b7550 in strbuf_add strbuf.c:311:2
        #4 0x5555557c1a88 in strbuf_addstr strbuf.h:310:2
        #5 0x5555557c1d4c in parse_list_objects_filter list-objects-filter-options.c:261:3
        git#6 0x555555885ead in handle_revision_pseudo_opt revision.c:2899:3
        #7 0x555555884e20 in setup_revisions revision.c:3014:11
        git#8 0x5555556c4b42 in cmd_rev_list builtin/rev-list.c:588:9
        git#9 0x5555555ec5e3 in run_builtin git.c:483:11
        git#10 0x5555555eb1e4 in handle_builtin git.c:749:13
        git#11 0x5555555ec001 in run_argv git.c:819:4
        git#12 0x5555555eaf94 in cmd_main git.c:954:19
        git#13 0x5555556fd569 in main common-main.c:64:11
        git#14 0x7ffff7ca714d in __libc_start_call_main (.../lib/libc.so.6+0x2a14d)
        git#15 0x7ffff7ca7208 in __libc_start_main@GLIBC_2.2.5 (.../libc.so.6+0x2a208)
        git#16 0x5555555ad064 in _start (git+0x59064)

This leak is valid, as we call `die()` and do not clean up the memory at
all. But what's curious is that this is the only leak reported, because
we don't clean up any other allocated memory, either, and I have no idea
why the leak sanitizer treats this buffer specially.

In any case, we can work around the leak by shuffling things around a
bit. Instead of calling `gently_parse_list_objects_filter()` and dying
after we have modified the filter spec, we simply do so beforehand. Like
this we don't allocate the buffer in the error case, which makes the
reported leak go away.

It's not pretty, but it manages to make t6112 leak free.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

This one is a little bit more curious. In t6112, we have a test that
exercises the `git rev-list --filter` option with invalid filters. We
execute git-rev-list(1) via `test_must_fail`, which means that we check
for leaks even though Git exits with an error code. This causes the
following leak:

    Direct leak of 27 byte(s) in 1 object(s) allocated from:
        #0 0x5555555e6946 in realloc.part.0 lsan_interceptors.cpp.o
        #1 0x5555558fb4b6 in xrealloc wrapper.c:137:8
        #2 0x5555558b6e06 in strbuf_grow strbuf.c:112:2
        #3 0x5555558b7550 in strbuf_add strbuf.c:311:2
        #4 0x5555557c1a88 in strbuf_addstr strbuf.h:310:2
        #5 0x5555557c1d4c in parse_list_objects_filter list-objects-filter-options.c:261:3
        git#6 0x555555885ead in handle_revision_pseudo_opt revision.c:2899:3
        #7 0x555555884e20 in setup_revisions revision.c:3014:11
        git#8 0x5555556c4b42 in cmd_rev_list builtin/rev-list.c:588:9
        git#9 0x5555555ec5e3 in run_builtin git.c:483:11
        git#10 0x5555555eb1e4 in handle_builtin git.c:749:13
        git#11 0x5555555ec001 in run_argv git.c:819:4
        git#12 0x5555555eaf94 in cmd_main git.c:954:19
        git#13 0x5555556fd569 in main common-main.c:64:11
        git#14 0x7ffff7ca714d in __libc_start_call_main (.../lib/libc.so.6+0x2a14d)
        git#15 0x7ffff7ca7208 in __libc_start_main@GLIBC_2.2.5 (.../libc.so.6+0x2a208)
        git#16 0x5555555ad064 in _start (git+0x59064)

This leak is valid, as we call `die()` and do not clean up the memory at
all. But what's curious is that this is the only leak reported, because
we don't clean up any other allocated memory, either, and I have no idea
why the leak sanitizer treats this buffer specially.

In any case, we can work around the leak by shuffling things around a
bit. Instead of calling `gently_parse_list_objects_filter()` and dying
after we have modified the filter spec, we simply do so beforehand. Like
this we don't allocate the buffer in the error case, which makes the
reported leak go away.

It's not pretty, but it manages to make t6112 leak free.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>

When trying to create a Unix socket in a path that exceeds the maximum
socket name length we try to first change the directory into the parent
folder before creating the socket to reduce the length of the name. When
this fails we error out of `unix_sockaddr_init()` with an error code,
which indicates to the caller that the context has not been initialized.
Consequently, they don't release that context.

This leads to a memory leak: when we have already populated the context
with the original directory that we need to chdir(3p) back into, but
then the chdir(3p) into the socket's parent directory fails, then we
won't release the original directory's path. The leak is exposed by
t0301, but only via Meson with `meson setup -Dsanitize=leak`:

    Direct leak of 129 byte(s) in 1 object(s) allocated from:
        #0 0x5555555e85c6 in realloc.part.0 lsan_interceptors.cpp.o
        #1 0x55555590e3d6 in xrealloc ../wrapper.c:140:8
        #2 0x5555558c8fc6 in strbuf_grow ../strbuf.c:114:2
        #3 0x5555558cacab in strbuf_getcwd ../strbuf.c:605:3
        #4 0x555555923ff6 in unix_sockaddr_init ../unix-socket.c:65:7
        #5 0x555555923e42 in unix_stream_connect ../unix-socket.c:84:6
        #6 0x55555562a984 in send_request ../builtin/credential-cache.c:46:11
        #7 0x55555562a89e in do_cache ../builtin/credential-cache.c:108:6
        #8 0x55555562a655 in cmd_credential_cache ../builtin/credential-cache.c:178:3
        #9 0x555555700547 in run_builtin ../git.c:480:11
        #10 0x5555556ff0e0 in handle_builtin ../git.c:740:9
        #11 0x5555556ffee8 in run_argv ../git.c:807:4
        #12 0x5555556fee6b in cmd_main ../git.c:947:19
        #13 0x55555593f689 in main ../common-main.c:64:11
        #14 0x7ffff7a2a1fb in __libc_start_call_main (/nix/store/h7zcxabfxa7v5xdna45y2hplj31ncf8a-glibc-2.40-36/lib/libc.so.6+0x2a1fb) (BuildId: 0a855678aa0cb573cecbb2bcc73ab8239ec472d0)
        #15 0x7ffff7a2a2b8 in __libc_start_main@GLIBC_2.2.5 (/nix/store/h7zcxabfxa7v5xdna45y2hplj31ncf8a-glibc-2.40-36/lib/libc.so.6+0x2a2b8) (BuildId: 0a855678aa0cb573cecbb2bcc73ab8239ec472d0)
        #16 0x5555555ad1d4 in _start (git+0x591d4)

    DEDUP_TOKEN: ___interceptor_realloc.part.0--xrealloc--strbuf_grow--strbuf_getcwd--unix_sockaddr_init--unix_stream_connect--send_request--do_cache--cmd_credential_cache--run_builtin--handle_builtin--run_argv--cmd_main--main--__libc_start_call_main--__libc_start_main@GLIBC_2.2.5--_start
    SUMMARY: LeakSanitizer: 129 byte(s) leaked in 1 allocation(s).

Fix this leak.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

We don't free the result of `remote_default_branch()`, leading to a
memory leak. This leak is exposed by t9211, but only when run with Meson
via `meson setup -Dsanitize=leak`:

    Direct leak of 5 byte(s) in 1 object(s) allocated from:
        #0 0x5555555cfb93 in malloc (scalar+0x7bb93)
        #1 0x5555556b05c2 in do_xmalloc ../wrapper.c:55:8
        #2 0x5555556b06c4 in do_xmallocz ../wrapper.c:89:8
        #3 0x5555556b0656 in xmallocz ../wrapper.c:97:9
        #4 0x5555556b0728 in xmemdupz ../wrapper.c:113:16
        #5 0x5555556b07a7 in xstrndup ../wrapper.c:119:9
        #6 0x5555555d3a4b in remote_default_branch ../scalar.c:338:14
        #7 0x5555555d20e6 in cmd_clone ../scalar.c:493:28
        #8 0x5555555d196b in cmd_main ../scalar.c:992:14
        #9 0x5555557c4059 in main ../common-main.c:64:11
        #10 0x7ffff7a2a1fb in __libc_start_call_main (/nix/store/h7zcxabfxa7v5xdna45y2hplj31ncf8a-glibc-2.40-36/lib/libc.so.6+0x2a1fb) (BuildId: 0a855678aa0cb573cecbb2bcc73ab8239ec472d0)
        #11 0x7ffff7a2a2b8 in __libc_start_main@GLIBC_2.2.5 (/nix/store/h7zcxabfxa7v5xdna45y2hplj31ncf8a-glibc-2.40-36/lib/libc.so.6+0x2a2b8) (BuildId: 0a855678aa0cb573cecbb2bcc73ab8239ec472d0)
        #12 0x555555592054 in _start (scalar+0x3e054)

    DEDUP_TOKEN: __interceptor_malloc--do_xmalloc--do_xmallocz--xmallocz--xmemdupz--xstrndup--remote_default_branch--cmd_clone--cmd_main--main--__libc_start_call_main--__libc_start_main@GLIBC_2.2.5--_start
    SUMMARY: LeakSanitizer: 5 byte(s) leaked in 1 allocation(s).

As the `branch` variable may contain a string constant obtained from
parsing command line arguments we cannot free the leaking variable
directly. Instead, introduce a new `branch_to_free` variable that only
ever gets assigned the allocated string and free that one to plug the
leak.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

When trying to create a Unix socket in a path that exceeds the maximum
socket name length we try to first change the directory into the parent
folder before creating the socket to reduce the length of the name. When
this fails we error out of `unix_sockaddr_init()` with an error code,
which indicates to the caller that the context has not been initialized.
Consequently, they don't release that context.

This leads to a memory leak: when we have already populated the context
with the original directory that we need to chdir(3p) back into, but
then the chdir(3p) into the socket's parent directory fails, then we
won't release the original directory's path. The leak is exposed by
t0301, but only when running tests in a directory hierarchy whose path
is long enough to make the socket name length exceed the maximum socket
name length:

    Direct leak of 129 byte(s) in 1 object(s) allocated from:
        #0 0x5555555e85c6 in realloc.part.0 lsan_interceptors.cpp.o
        #1 0x55555590e3d6 in xrealloc ../wrapper.c:140:8
        #2 0x5555558c8fc6 in strbuf_grow ../strbuf.c:114:2
        #3 0x5555558cacab in strbuf_getcwd ../strbuf.c:605:3
        #4 0x555555923ff6 in unix_sockaddr_init ../unix-socket.c:65:7
        #5 0x555555923e42 in unix_stream_connect ../unix-socket.c:84:6
        #6 0x55555562a984 in send_request ../builtin/credential-cache.c:46:11
        #7 0x55555562a89e in do_cache ../builtin/credential-cache.c:108:6
        #8 0x55555562a655 in cmd_credential_cache ../builtin/credential-cache.c:178:3
        #9 0x555555700547 in run_builtin ../git.c:480:11
        #10 0x5555556ff0e0 in handle_builtin ../git.c:740:9
        #11 0x5555556ffee8 in run_argv ../git.c:807:4
        #12 0x5555556fee6b in cmd_main ../git.c:947:19
        #13 0x55555593f689 in main ../common-main.c:64:11
        #14 0x7ffff7a2a1fb in __libc_start_call_main (/nix/store/h7zcxabfxa7v5xdna45y2hplj31ncf8a-glibc-2.40-36/lib/libc.so.6+0x2a1fb) (BuildId: 0a855678aa0cb573cecbb2bcc73ab8239ec472d0)
        #15 0x7ffff7a2a2b8 in __libc_start_main@GLIBC_2.2.5 (/nix/store/h7zcxabfxa7v5xdna45y2hplj31ncf8a-glibc-2.40-36/lib/libc.so.6+0x2a2b8) (BuildId: 0a855678aa0cb573cecbb2bcc73ab8239ec472d0)
        #16 0x5555555ad1d4 in _start (git+0x591d4)

    DEDUP_TOKEN: ___interceptor_realloc.part.0--xrealloc--strbuf_grow--strbuf_getcwd--unix_sockaddr_init--unix_stream_connect--send_request--do_cache--cmd_credential_cache--run_builtin--handle_builtin--run_argv--cmd_main--main--__libc_start_call_main--__libc_start_main@GLIBC_2.2.5--_start
    SUMMARY: LeakSanitizer: 129 byte(s) leaked in 1 allocation(s).

Fix this leak.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

We don't free the result of `remote_default_branch()`, leading to a
memory leak. This leak is exposed by t9211, but only when run with Meson
with the `-Db_sanitize=leak` option:

    Direct leak of 5 byte(s) in 1 object(s) allocated from:
        #0 0x5555555cfb93 in malloc (scalar+0x7bb93)
        #1 0x5555556b05c2 in do_xmalloc ../wrapper.c:55:8
        #2 0x5555556b06c4 in do_xmallocz ../wrapper.c:89:8
        #3 0x5555556b0656 in xmallocz ../wrapper.c:97:9
        #4 0x5555556b0728 in xmemdupz ../wrapper.c:113:16
        #5 0x5555556b07a7 in xstrndup ../wrapper.c:119:9
        #6 0x5555555d3a4b in remote_default_branch ../scalar.c:338:14
        #7 0x5555555d20e6 in cmd_clone ../scalar.c:493:28
        #8 0x5555555d196b in cmd_main ../scalar.c:992:14
        #9 0x5555557c4059 in main ../common-main.c:64:11
        #10 0x7ffff7a2a1fb in __libc_start_call_main (/nix/store/h7zcxabfxa7v5xdna45y2hplj31ncf8a-glibc-2.40-36/lib/libc.so.6+0x2a1fb) (BuildId: 0a855678aa0cb573cecbb2bcc73ab8239ec472d0)
        #11 0x7ffff7a2a2b8 in __libc_start_main@GLIBC_2.2.5 (/nix/store/h7zcxabfxa7v5xdna45y2hplj31ncf8a-glibc-2.40-36/lib/libc.so.6+0x2a2b8) (BuildId: 0a855678aa0cb573cecbb2bcc73ab8239ec472d0)
        #12 0x555555592054 in _start (scalar+0x3e054)

    DEDUP_TOKEN: __interceptor_malloc--do_xmalloc--do_xmallocz--xmallocz--xmemdupz--xstrndup--remote_default_branch--cmd_clone--cmd_main--main--__libc_start_call_main--__libc_start_main@GLIBC_2.2.5--_start
    SUMMARY: LeakSanitizer: 5 byte(s) leaked in 1 allocation(s).

As the `branch` variable may contain a string constant obtained from
parsing command line arguments we cannot free the leaking variable
directly. Instead, introduce a new `branch_to_free` variable that only
ever gets assigned the allocated string and free that one to plug the
leak.

It is unclear why the leak isn't flagged when running the test via our
Makefile.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>