3d filament holder

This is my take on the wall mounted spool holder. I designed this part to save on material while still being very durable since multiple full spools o

Download this STL Model for 3D printer made by martym3d. New filament spool holder for 3D printing. Suitable for 1kg spools. Simple and easy expandable modular design for arranging filament spools, with easy access. Consists of a reinforced support that holds two rollers where the filament spools are placed, the rollers rotate freely facilitating the rolling of the spools. It serves to store the filament ordered and in parallel of all the spools you want, to place it next to the 3d printer…

Filament spool holder / Держатель катушки филомента | Download free and paid 3D printable STL files

Filament spool holder with bearings for Ender 3. 2 bearings necessary:Outer diameter: 22mmInner diameter: 8mmWidth: 7mmhttps://www.aliexpress.com/item

Spool holder for mounting on a wall. One of my printers is tight in a corner and it has a side-fed extruder so I needed a spot above it to hold the filament. I made it large enough to fit 3KG spools as well as the more typical 1KG spools. Uses wood screws (#8 to mount and #6 screws to assemble). 3/4" PVC pipe is used for the spool axel. The spigots are super glued into the ends of the PVC pipe. Included is a spigot for 12 mm OD pipe, as I have a couple of odd spools with very small center…

I have tried most all of the filament clips and none would sufficiently hold my filament. I received a similar clip with a spool of filament that worked well, so I tried to duplicate it's main attributes, which would securely hold 1.75 mm filament to the edge of the spool. *** UPDATE *** Added "SmallFilamentClip.stl" file that is the same clip but with a smaller opening so it will clip securely to spools with thinner sidewalls. You can also heat up the corner of the clip with a lighter and…

I realy love the fastswitch ultimate spool adapter by vidschofelix (http://www.thingiverse.com/thing:1874612).The original anet filament holder doesn'

Spool holder for the 3D printer Flashforge Adventurer 3, which makes it easy to 3D print using filaments with varying spool sizes.The built-in filamen

A shorter version of my previous filament holder.Filament spool holder with a maximum width of 100 mm. (https://www.thingiverse.com/thing:4834202)Upda

I designed this filament spool holder to hold my filament spool just over my 3d printer. It is very handy and easy to use. You will need 2 M3 20-25mm

oneadaydotse shares: I want to store my filament spool behind my printer, on the wall, and I want to be able to switch filament quick and easy. To accomplish that I’ve designed this wall moun…

Download this STL Model for made by alecs_form. Design also available in 3MF. This set of holders for filament spools can be mounted to the popular IKEA SKADIS pegboard. In order to hold one spool there are always a left and a right part which belong together. By selecting the appropiate distance (=holes) between the parts it can be adapted to spools of different width: * 0: 4 - 5,7 cm * 1: 6 - 8 cm * 2: 8 - 9,8 cm Due to the alternating and pattern of the mounting holes you should pay…

Remix of the honeycomb version of Olafpeter´s Filament Holder to fit 22 mm rods.In addition, the hole spacing for wall mounting was modified, too.

Download this STL Model for made by murbay52. Anycubic 4max 3D printer filament spool holder

Download this STL Model for made by JCL. Remake for Z18 of Universal stand-alone filament spool holder http://www.thingiverse.com/thing:508896

External spool holder for the FlashForge Finder 3D printer 3D model, CreativeTools

Download the files for the 3D printed Universal stand-alone filament spool holder (Fully 3D-printable) by CreativeTools

Simple holder for your filament. Centerpiece is now customized to fit the width of your filament roll.

Shelf for filament for pipes with diameter 19-21.3 mm. No support. In the area of ​​wall fastenings, the filling is 100% for reliability. This is

Universal stand-alone filament spool holder (Fully 3D-printable) by CreativeTools - Thingiverse