Low-Field Ferroelectricity in 10 nm AlBScN Thin Films
Authors:
Xiaolei Tong,
Pedram Yousefian,
Ziyi Wang,
Meenakshi A. Saravanan,
Rajeev Kumar Rai,
Giovanni Esteves,
Eric A. Stach,
Roy H. Olsson III
Abstract:
Ferroelectric aluminum scandium nitride (Al1-xScxN, AlScN) offers CMOS-compatible integration but suffers from high coercive fields and leakage currents that hinder thickness scaling. Further reduction in thickness is essential for low-voltage embedded nonvolatile memory applications. Boron incorporation into AlScN (AlBScN) suppresses leakage current in films down to 40 nm, yet its ferroelectric c…
▽ More
Ferroelectric aluminum scandium nitride (Al1-xScxN, AlScN) offers CMOS-compatible integration but suffers from high coercive fields and leakage currents that hinder thickness scaling. Further reduction in thickness is essential for low-voltage embedded nonvolatile memory applications. Boron incorporation into AlScN (AlBScN) suppresses leakage current in films down to 40 nm, yet its ferroelectric characteristics in ultrathin films remains unexplored. This letter demonstrates robust ferroelectric switching in 10 nm sputtered AlBScN capacitors with a low coercive field and approximately two orders of magnitude lower leakage than AlScN. Notably, ferroelectric switching was observed at 2.2 MV/cm in capacitance-voltage measurements, and symmetric polarization reversal occurred near 4.6 MV/cm in positive-up-negative-down (PUND) measurements using 2 μs pulses. Moreover, Weibull analysis revealed a breakdown-to-coercive-field ratio (EBD/Ec) of ~2.2. These findings demonstrated AlBScN as a promising candidate for CMOS back-end-of-line (BEOL) compatible ferroelectric applications with improved energy consumption and reduced leakage current.
△ Less
Submitted 11 November, 2025;
originally announced November 2025.